Hand Held Walk Behind Floor Scrubber With Plastic Universal Wheels
It is the compact floor scrubber, with AC power, no working time
restrict.
turning radius is small , you can turn around the machine even in
the narrow passageway.
| model | FS17F | squeegee width(mm) | 700 |
| brush dia.(mm) | 430mm | brush driving mode | metal gear reduce |
| solution tank(L) | 40 | brush speed(rpm) | 180 |
| recovery tank(L) | 45 | brush motor (w) | 800 |
| suction motor(w) | 600 | efficiency(m2/h) | 1500 |
| driving system | brush sisisted | installed power | 120V/220V |
| dirty water level sensor | yes | driving speed adjust | yes |
| dimension | 900x570x874 | loading | 60pcs/20' 126/40GP
|
Features.
- Do not pick the ground, easy to deal with, suitable for epoxy
floor, floor, PVC floor, terrazzo, small square brick etc.
- Transparent cover for the recovery tank, easy to check the
situation inside the tank;.
- Brush system with automatic assembly and disassembly design without
any tools for operation
- Ametek suction motor from Italy, more efficient and endurable;
- After the clear water box has the special opening, may use the pipe
to add water directly
- The brush-plate and squeegee can lift stablely
- overlength power wire, quality assurance.
- Big capacity water tanks
- Manpower cost is low, save money, save worry
- Adjustable handle design, operator can always find comfortable
working position;
it is the smallest model in FS series. it is suitable for smaller
and voider area,because it is wire type.however,it is also has
overlength electric wire,This means it has a bigger cleaning
radius.smaller and flexible.40Lsolution tank and 45Lrecovery tank
,it can clean 1500sq.m per hour,deal with all kinds of stains
easily,also,you can add detergent to remove stubborn stains like
greasy dirt.The machine can be equipped with a cleaning pad to
clean and polish high quality hard floor
Modern floor scrubbers have a pre-sweep option that removes the
need to sweep the floor before scrubbing. The pre-sweep brush head
is placed in front of the vacuum system to collect dust and debris
before it can block the vacuum system. In the past it was important
to sweep the floor before scrubbing to remove any debris and dust
that could clog the vacuum hose or build up in the vacuum motor,
which can decrease performance. If this happens, the vac hose may
need to be removed to clear the obstruction and/or the vac motor
may need to be blown out with compressed air. Stripping Solution
should never be used as it can cause damage to the solution
dispensing system, but can still be vacuumed up by the machine
without harm.
Occasionally, the solution system should be flushed with water
mixed with vinegar to remove any soap and calcium deposits that
could build in the solution system.
Services
Dycon Service provides specialized commercial and industrial
cleaning solutions, catering for all your cleaning needs. As a
dedicated cleaning business, we deliver on time and quality
services
With our crew of qualified and experienced cleaners, no matter what
the Dycon is all about providing professional and quality work.
As a dedicated cleaning business, we deliver on time and quality
services.
