Full Automatic Floor Scrubber Dryer Machine 20 Inch Single Brush No
Telecontroller
Features.
1. Batteries can be maintained bu overturning recovery tank at 90
degrees without any tools
2. Install reset fuses on the back side of solution tank, easy for
your operation;
3. Steel gear drives the brush, much more powerful and reliable;
4. Classic products, cost-effective. The products are widely used
in China and world market withgood reputation
5. Core parts adopt imported brand
6. One of the largest and earliest manufacturer of electric floor
scrubber ,road sweeper, street sweeper in China
7. American rubber, high - pressure wear, anti impact, anti
sprinkler
8. Key-type switch: convenient for operation and maintenance.
9. Intelligent Auto unloading brush, to avoid tedious manual.
10. 800mm squeegee width, good squeegee curve
Our commitment
1. your inquiry will be reply as soon as possible
2. your order will be taken seriously
3. your interests will be protected absolutely
Our products goes in each and every sector like industries, auto
workship, multiplex, hotels, school, colleage, railway station and
platforms, housekeeping agencies, corporate and normal offices or
any good property you can think.
Dycon Services has vast experience in the cleaning industry from
office buildings, shopping centers, schools, child care centers,
hospitals to aged care centers and more.
Services
Dycon Service provides specialized commercial and industrial
cleaning solutions, catering for all your cleaning needs. As a
dedicated cleaning business, we deliver on time and quality
services
With our crew of qualified and experienced cleaners, no matter what
the Dycon is all about providing professional and quality work.
As a dedicated cleaning business, we deliver on time and quality
services.
model | FS20 | Squeegee Width(mm) | 850 |
suction motor | 550 | Solution Tank(L) | 55 |
Recovery Tank(L) | 60 | Brush Dia.(mm) | 510 |
Brush Driving Mode | Metal Gear Reduce | Brush Speed(rpm) | 200 |
Brush Motor(W) | 500 | Traction Motor | 500 |
Efficiency(m2/h) | 2000 | Installed Power | 24V |
Battery | 12Vx2 120Ah | One Key Control | YES |
Dirty Water Level Sensor | YES | Driving Speed Adjust | YES |
Dimension(mm) | 1240x550x1100 | Loading | 26pcs/20ft |
| | | 54pcs/40GP |
Feedbacks
Nikolay: our partnership with Dycon goes back a long way and thru
many years of ups and downs, we were able to cope up with the
market demand. I am fortunate to establish and maintain productive
business relationships with you. Looking forward to more fruitful
years ahead.
Lisa: your quality and your updating trends by developing new
models with the latest technologies in the world are absolutely
remarkable.
Jun: Our challenge was to provide quality yet affordable floor
scrubber machine. Dycon provided a wide variety of their products
that gave a good-looking and effective interface. The floor
scrubber provided all the functionality we needed.
Modern floor scrubbers have a pre-sweep option that removes the
need to sweep the floor before scrubbing. The pre-sweep brush head
is placed in front of the vacuum system to collect dust and debris
before it can block the vacuum system. In the past it was important
to sweep the floor before scrubbing to remove any debris and dust
that could clog the vacuum hose or build up in the vacuum motor,
which can decrease performance. If this happens, the vac hose may
need to be removed to clear the obstruction and/or the vac motor
may need to be blown out with compressed air. Stripping Solution
should never be used as it can cause damage to the solution
dispensing system, but can still be vacuumed up by the machine
without harm.
Occasionally, the solution system should be flushed with water
mixed with vinegar to remove any soap and calcium deposits that
could build in the solution system.
After each use, the dispensing (solution) and especially the
collection (recovery) tanks should be emptied and rinsed out to
prevent dirt build up. Also, the
pads/brushes, vac hose, and squeegee should also be rinsed to
prevent dirt build up. The vac motor should be run for several
minutes afterwards to remove any moisture
that could be present in the vac motor to reduce chances of
corrosion that could damage the vac motor. Failure do to this
maintenance could cause in a loss of vacuum
airflow and increase in costly repairs.
