Key Features of the VC20 Floor Scrubber:
✅ Cordless Freedom & Superior Maneuverability
Powered by long-lasting batteries, the VC20 moves smoothly and
flexibly without the hassle of cords or outlets. Clean large areas
without interruptions!
✅ Intuitive Controls for Effortless Operation
Smart LED Button Switch (red/green lights) with pictographic
function icons—easy to understand, even for first-time users.
Minimal training required, reducing labor costs and downtime.
✅ Leak-Proof Water Supply System
Equipped with a solenoid valve to prevent water leakage, ensuring
consistent performance and no wasted cleaning solution.
✅ Effortless Brush & Squeegee Adjustment
Dual-lever control for quick raising/lowering of brushes and
squeegees—no bending or manual adjustments needed.
Automatic squeegee uncoupling protects the unit if accidentally
impacted, preventing damage.
✅ Large-Capacity Tanks for Uninterrupted Cleaning
High-volume solution tank fills quickly, reducing refill downtime.
Efficient filtration system prevents water from entering the vacuum
motor, ensuring longer motor life.
✅ Durable, Low-Maintenance Design
PU-reinforced drive wheels resist corrosion and wear, extending
lifespan.
Brush-type water-retaining skirt (instead of traditional rubber)
for easier handling, anti-aging, and longer use.
Removable squeegee system—install or replace in seconds with no
hassle.
✅ Enhanced Visibility & Easy Maintenance
Transparent brush cover window allows for quick visual inspection.
Fast brush installation/removal—saving time on maintenance.
✅ Quiet & Energy-Efficient Operation
Optimized silencer technology reduces noise for a more comfortable
work environment.
ECO mode extends battery life while minimizing power consumption
and noise.
How to Use the Dycon VC20 Industrial Scrubber for Post-Renovation
Cleaning
After a home renovation, floors are often covered in dust, paint
splatters, adhesive residues, and construction debris. The Dycon
VC20 Industrial Scrubber is the perfect machine for fast, thorough,
and dust-free cleaning. Here’s a step-by-step guide to using it
effectively.
Step 1: Pre-Cleaning Preparation
① Remove Large Debris
Sweep or vacuum loose nails, glass shards, and chunks of drywall to
prevent scratch damage to the scrubber’s brush.
Use a putty knife to scrape off dried paint or glue (avoid metal
scrapers on delicate floors).
② Pre-Treat Stubborn Stains
Dust & Powder Residues: Lightly mist with water to prevent airborne
dust when scrubbing.
Paint & Adhesive Stains: Apply a neutral pH cleaner (avoid
acids/alkalis) and let sit for 3-5 minutes before scrubbing.
Sticky Tape Residue: Use a citrus-based adhesive remover for safe
dissolving.
Step 2: VC20 Setup for Renovation Cleaning
① Attach the Right Brush
Hard Bristle Brush → Best for tile, concrete, and epoxy floors
(aggressive scrubbing).
Soft Brush → For finished wood or polished stone (gentler clean).
② Adjust Squeegee & Water Flow
Set the squeegee angle for maximum water recovery (prevents
streaks).
Fill the clean water tank with warm water + renovation-grade
cleaner (follow dilution ratios).
Install a fine filter in the dirty water tank to trap fine dust.
Step 3: Cleaning Process
① First Pass – Deep Scrub (Power Mode)
Move in slow, overlapping "S" patterns to loosen grime.
Focus on high-traffic areas & corners (adjust brush pressure if
needed).
For wall edges, tilt the machine slightly to reach baseboards.
② Immediate Water Recovery
Check the transparent squeegee window to ensure no dirty water
remains.
Empty the dirty water tank frequently (construction debris fills it
quickly).
③ Second Pass – Rinse (ECO Mode)
Refill with clean water only.
Switch to soft brush & ECO mode for a final polish.
Step 4: Post-Cleaning Maintenance
① Machine Care
Rinse brushes & tanks immediately (dried concrete dust can clog the
system).
Inspect filters and clean/replace if clogged.
② Floor Drying & Protection
Use a microfiber mop to dry floors (prevents water marks on
sensitive surfaces).
For porous stone/tile, apply a sealer after cleaning.
Why VC20 is Perfect for Post-Renovation Cleaning?
✔ Dust-Free Cleaning – Sealed suction prevents dust clouds (unlike
brooms).
✔ Stain Removal Power – Adjustable brush pressure tackles paint,
glue, and grout haze.
✔ Reaches Every Corner – Maneuverable design cleans under cabinets
& tight edges.
✔ Saves Time & Labor – Cleans 3x faster than manual mopping.
Pro Tips
⚠ Avoid using on freshly sealed floors (wait 72 hours).
